• banner

Lihlahisoa

  • High Velocity Oxygen Fuel Spraying Tungsten Carbide Powder Coating

    Lebelo le Phahameng la Oksijene Fuel Ho Fafatsa Tungsten Carbide Powder Coating

    Lebelo le phahameng la Oxygen Fuel Spraying Coating

    Melemo ea Tekheniki:

    1, Mekhoa e meraro ea ho sebetsa: moruo, Phahameng, Ultra

    Mohaho o ts'oanang oa ho roala ka mokhoa o ts'oanang le sekhahla se phahameng (porosity ka tlase ho0.2%)

    Decarb e nyane kapa e se nang letho (e sa bonahaleng ke XRD)

    Ho thatafala hoa holimo (ho feta 1600 HV0.3), liphapang tse fokolang ho ea ka libaka (50-60HV vs.150-200 HV bakeng sa HVOF e tloaelehileng)

    Ho se mamelle ho eketsehileng

    Matla a phahameng le thepa e hanyetsanang le cavitation

    Ge tiile ka 50um e teteaneng ea WC tlas'a 200MPa ea khase ea naetrojene

    Hsekhahla sa ho fafatsa ka matla: 5-10um/pass

    Cbofokoli ba ho oting bo ka lokisoa sebakeng sa heno.

  • High-Temperature Durable Silicon Carbide SSIC  Seal Rings Bushes

    Mocheso o Phahameng o Tšoarellang Silicon Carbide SSIC Seal Rings Bushes

    Tlhaloso ea Sehlahisoa Lintlha tsa Pakete: E hlophisitsoe hantle ebile e pakiloe ka mabokoseng a karete.Boema-kepe:Chengdu Mohlala oa Setšoantšo: Nako ea Ketapele: Bongata(Likotoana) 1 - 1000 >1000 Est.Nako(matsatsi) 25 Ho buisanoa ka likristale tsa silicon carbide li na le thepa e kang boima bo phahameng, mocheso o phahameng, ho hanyetsa ho roala, conductivity ea mocheso le conductivity e ntle tlas'a maqhubu a phahameng.E sebelisoa haholo ho aerospace, semiconductors le li-valve seal.Litsebi li lumela hore re mathela ho R...
  • Tungsten Cabide Pins for Grinders, Attritors or Sand Mills

    Tungsten Cabide Pins bakeng sa Li-grinders, Attritors kapa Sand Mills

    Thepa e thata ea alloy e entsoe ka alloy e thata, ho kenyeletsoa le 'mele oa pin pin.Ntlheng e 'ngoe ea 'mele oa phini ea molamu ho fanoe ka khoele e ka ntle, 'me ntlha ea ho qetela ea khoele e ka ntle e na le hlooho e nang le hexagonal countersunk;Ka lehlakoreng le leng la 'mele oa phini, ntlha e chitja e entsoe ka sebopeho se chitja. Moetso oa thuso o etsa phini ea molamu e entsoeng ka carbide e entsoeng ka samente, ebe e e tiisa ka khoele, 'me e na le sebopeho sa qetello se chitja.Hobane ntlha e 'ngoe ea molamu oa carbide e entsoeng ka samente e fanoa ka mohaho o nang le khoele le moralo o entsoeng ke motho oa sefahleho sa ho qetela se nang le hlooho ea hexagonal countersunk, ho loketse bakeng sa ho kenya le ho hlokomeloa. thepa e tala le ho etsa hore ho sila ka botlalo haholoanyane.Thepa e entsoe ka alloy e tletseng e thata, e ka khonang haholo

  • High Performance K1 0/K20/K30/K40 Tungsten Carbide Plate

    Mosebetsi o Phahameng K1 0/K20/K30/K40 Tungsten Carbide Plate

    boima bo phahameng le matla, ho apara hantle le ho hanyetsa ho bola le botsitso bo hlakileng tlas'a mocheso o phahameng (esita le ho 500 ºC ha e le hantle ha e fetohe 'me ho 1000 ºC e ntse e le boima bo phahameng).

    Li-tungsten carbide strips li atisa ho sebelisoa bakeng sa ho phekola lehong le tiileng, boto ea ho kuta le li-fiberboard tse bohareng, hape li sebelisetsoa ho etsa lisebelisoa tsa mapolanka, joalo ka sesebelisoa sa ho etsa, reamer, lehare la thipa le lehare le fapaneng, likhoele tsa rona li kopana le boleng ba ISO 9001:2015. maemo.

  • Tungsten Carbide Drill Bit Buttons For Stone Drilling From Factory KLT

    Tungsten Carbide Drill Bit Buttons Bakeng sa Ho Cheka Lejoe Ho Tsoa Fekthering ea KLT

    Likonopo tsa ho rafa mashala
    Likonopo tsena tsa tungsten carbide li sebelisoa haholo merafong ea mashala, likhetho tsa mashala, likotoana tsa ho cheka mashala, meepo ea mashala.
    li-cutter picks, ho epolla ha litsela, ho cheka ka rotary bakeng sa lesoba la qubu, ho sila ka tsela.
    joalo joalo.Gungnir Industry Ltd e fana ka konopo e phahameng ea ts'ebetso, 'me boleng bo fihla maemong a holimo a machabeng, joalo ka
    Sandvik, Kennametal.

  • Tungsten Carbide Nozzle High Pressure Cleaner Durable Coarse Thread With Rubber Cover Or Aluminium Cover

    Tungsten Carbide Nozzle Cleaner High Pressure Cleaner e tšoarellang e mahoashe ka Sekoaelo sa Rabara Kapa Sekoahelo sa Aluminium

    Ka lebaka la sebopeho sa eona se bonolo, likotoana tsa ho phunya taemane li na le matla a phahameng, ho hanyetsa ho apara ho phahameng le ho hanyetsa tšusumetso.E ne e le lilemong tsa bo-1980. E 'ngoe ea litheknoloji tse tharo tse ncha tsa ho cheka lefatšeng.Tšebeliso ea masimo e paka hore likotoana tsa daemane li na le lebelo ha li cheka ka mokhoa o bonolo-bohareng o thata.Ka potlako, litšoantšo tse ngata, bophelo bo bolelele, mosebetsi o tsitsitseng, likotsi tse fokolang tsa likoti, boleng bo botle bo botle joalo-joalo.Carbide tungsten steel nozzle.Joaloka e 'ngoe ea likarolo tsa bohlokoa ka har'a sekoaelo sa taemane, e na le phello ea tlhoekiso holim'a karoloana ea boro le tlase ho seliba le phello ea ho robeha ha lejoe la hydraulic. kabo e leka-lekaneng ya kgatello hodima lefika.

  • YG6/YG8/YN6/YG10/YG11 Tungsten Carbide Sealing Ring for Mechanical Seal

    YG6/YG8/YN6/YG10/YG11 Tungsten Carbide Seal Ring for Mechanical Seal

    Rela ea ho tiisa ke eona ntho e ka sehloohong e tiisang lenonyeletso la rotary.Litšobotsi tse phahameng tsa ho hanyetsa tsa tungsten carbide roll rings li u fa
    Ts'ebetso e phahameng ka ho fetesisa ea boleng bo holimo.Tsena li sebelisoa libakeng tse hloekisang oli, limela tsa petrochemical, limela tsa manyolo, le liindasteri tsa meriana tse kang lipompo, li-compressor le li-agitators. .

  • High precision OEM ODM custom tungsten carbide sleeve for pump

    Ho nepahala ho phahameng OEM ODM tloaelo tungsten carbide sleeve bakeng sa pompo

    Li-sleeve tsa samente tsa carbide shaft li bapala karolo ea ho fumana kapa ho beha, ho ts'ehetsa le ho sireletsa li-shafts tse potolohang hore li se ke tsa roala. joalo ka lisebelisoa tse tsamaeang ka enjene, li-hydraulic system le lisebelisoa tsa phahamiso tsa liliba tsa oli tse kang lipompo tsa motlakase tse kenang ka tlas'a metsi (ESPs), lipompo tsa centrifugal, le metjhini e meng ea turbo.

  • Tungsten Carbide Throttle Valve Plate

    Tungsten Carbide Throttle Valve Plate

    Tungsten Carbide Throttle Valve e na le letoto la lisebelisoa tse ntle tse kang boima bo phahameng, ho hanyetsa ho roala, matla a matle le ho tiea, ho hanyetsa mocheso le ho hanyetsa kutu, haholo-holo boima ba eona bo phahameng le ho hanyetsa ho roala, tse lulang li sa fetohe esita le mocheso oa 500 ° C , E ntse e le boima bo phahameng ho 1000 ℃. Khampani ea rona e ka khona ho etsa lihlahisoa tse sa tšoaneng tse sa tsitsang tsa alloy tse sa tsitsang.Limaraka tse tloaelehileng: YG8, YG10, YG13, YG11C, joalo-joalo Lihlahisoa tsa alloy tse thata tse sa tloaelehang, likarolo tse sa sebetseng le likheo tse fapaneng tse sa tloaelehang tsa sebopeho sa alloy, ho otlolla, ho bōptjoa, sehlooho se batang, extrusion e batang le forging e chesang e shoa bakeng sa liindasteri tse sa tšoaneng, joalo-joalo, li sebelisoa haholo liindastering tse fapaneng bakeng sa ho otlolla le ho bopa shoa.Joalo ka lijana tsa tšepe tse sa hloekang, lisebelisoa, lisebelisoa tse otlollang, ho etsa le liforomo tse seng tsa makenete bakeng sa indasteri ea makenete.

  • Tungsten carbide machinery bearing ball,carbide beads/pellet.

    Mechini ea Tungsten carbide e nang le bolo, lifaha tsa carbide / pellet.

    Kereiti ea boleng e khothalelitsoeng: YG6,YG6X,YG8
    1. Feme e nang le boiphihlelo ba lilemo tse 20 ka bareki ba tsitsitseng ho feta linaha tse 30.
    2. Ho tsamaisoa ka potlako, ka tloaelo matsatsi a 7-10.
    3.Basebeletsi ba Sales ho feta lilemo tse 5 tsa boiphihlelo lefapheng lena ka kutloisiso e ntle le Senyesemane se hlakileng.
    4.Prompt araba ka hare ho lihora tse 24 ka litlhahiso tse nang le phihlelo.
    5.Customized carbide likarolo ba ho feta amohelehile mona.

  • Customized Polishing Throttle Valve Bering Wear-resistant High Hardness Use Longlife Time

    Customing Polishing Throttle Valve Bering Wear-resistant High Hardness Sebelisa Nako e telele ea bophelo

    Tungsten Carbide Throttle Valve e na le letoto la lisebelisoa tse ntle tse kang boima bo phahameng, ho hanyetsa ho roala, matla a matle le ho tiea, ho hanyetsa mocheso le ho hanyetsa kutu, haholo-holo boima ba eona bo phahameng le ho hanyetsa ho roala, tse lulang li sa fetohe esita le mocheso oa 500 ° C , E ntse e le boima bo phahameng ho 1000 ℃. Khampani ea rona e ka khona ho etsa lihlahisoa tse sa tšoaneng tse sa tsitsang tsa alloy tse sa tsitsang.Limaraka tse tloaelehileng: YG8, YG10, YG13, YG11C, joalo-joalo Lihlahisoa tsa alloy tse thata tse sa tloaelehang, likarolo tse sa sebetseng le likheo tse fapaneng tse sa tloaelehang tsa sebopeho sa alloy, ho otlolla, ho bōptjoa, sehlooho se batang, extrusion e batang le forging e chesang e shoa bakeng sa liindasteri tse sa tšoaneng, joalo-joalo, li sebelisoa haholo liindastering tse fapaneng bakeng sa ho otlolla le ho bopa shoa.Joalo ka lijana tsa tšepe tse sa hloekang, lisebelisoa, lisebelisoa tse otlollang, ho etsa le liforomo tse seng tsa makenete bakeng sa indasteri ea makenete.